2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models   总被引：1，自引：0，他引：1  

Ali Ozgun Ok  Asli Ozdarici-Ok 《International Journal of Digital Earth》2018,11(6):583-608

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.  相似文献   

Geometric-constrained multi-view image matching method based on semi-global optimization     

Wenhao Zhao  Li Yan 《地球空间信息科学学报》2018,21(2):115-126

Targeting at a reliable image matching of multiple remote sensing images for the generation of digital surface models, this paper presents a geometric-constrained multi-view image matching method, based on an energy minimization framework. By employing a geometrical constraint, the cost value of the energy function was calculated from multiple images, and the cost value was aggregated in an image space using a semi-global optimization approach. A homography transform parameter calculation method is proposed for fast calculation of projection pixel on each image when calculating cost values. It is based on the known interior orientation parameters, exterior orientation parameters, and a given elevation value. For an efficient and reliable processing of multiple remote sensing images, the proposed matching method was performed via a coarse-to-fine strategy through image pyramid. Three sets of airborne remote sensing images were used to evaluate the performance of the proposed method. Results reveal that the multi-view image matching can improve matching reliability. Moreover, the experimental results show that the proposed method performs better than traditional methods.  相似文献   

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000     

U. G. Sefercik  S. Karakis  C. Atalay  I. Yigit  U. Gokmen 《国际地球制图》2018,33(10):1139-1154

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.  相似文献   

无人机遥感真正射影像高精度制图     

刘宇  郑新奇  艾刚 《测绘通报》2018,(2):83-88

近年来无人机低空遥感技术不断发展,利用无人机影像生成的真正射影像（TDOM）在成图精度、制作流程方面仍有提高的空间。本文采用固定翼无人机和专业摄影相机采集影像,布设地面控制点,提出了利用运动恢复结构（SfM）和多视立体视觉（MVS）工作流来生成高精度数字表面模型（DSM）和数字正射影像（DOM）的方法;对遮蔽倾斜部分进行阴影检测、DSM修编和多视影像纹理补偿生成TDOM;最后用TDOM上随机分布的检查点进行精度检查,水平精度为3.3 cm,垂直精度为7.5 cm;消除了DOM中倾斜和阴影部分,使建筑物保持垂直视角,生成的满足1：500比例尺高精度并消除倾斜阴影的TDOM可用于农村宅基地确权、国土规划设计等领域。  相似文献   

三组火山强迫资料差异及其对模式模拟结果的影响     

高雅  高超超 《气候变化研究进展》2021,17(3):305-316

Gao2008、Crowley2013和Sigl2015火山强迫资料,均基于极地冰芯重建。由于每组重建使用的冰芯数据和分析方法等不同,因此结果存在差异,从而影响气候模式应用。文中详细梳理三组火山强迫资料在原始冰芯数据、信号识别提取和沉积通量计算等方面的差异;介绍重建中涉及的对未知火山事件发生季节、纬度及从极地硫酸盐沉积通量向平流层辐射强迫通量转换等所做的假设;归纳资料中存在的共性问题。在此基础上,总结重建不确定性对模式应用的影响,希望为涉及气候模式的研究工作提供从气候系统外强迫资料解读或审视气候变化模拟与影响评估的视角,更好为气候模拟和预测服务。  相似文献   

Main technical innovations of Songke Well No.2 Drilling Project     

《China Geology》2018,1(2):187-201

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.  相似文献   

“松科二井”用硬岩长寿命钻头的设计与应用     

李春  沈立娜 《探矿工程》2018,45(2):56-60

为提高“松科二井”在深井硬岩钻进中的寿命与效率,选用了高性能胎体材料、高强度焊接材料,并采用了合理的钻头结构与水路结构设计,研制的φ216/124 mm金刚石取心钻头在“松科二井”取得了良好的效果,本文介绍了适用于深井硬岩的金刚石钻头的设计及应用效果。  相似文献   

3500m岩心钻探装备在油气井勘查中的示范应用     

任启伟  刘凡柏  高鹏举  赵远  伍晓龙 《探矿工程》2018,45(10):57-61

3500 m岩心钻探装备（YDX—6型钻机）是我国自主研发的深部矿产资源勘查技术装备,采用N级口径钻深可达3500 m,其最大特点是采用长油缸钻进和起下钻。本文主要介绍了该钻机在油气井勘查中生产试验情况,同时对矿区地层、钻孔结构、钻进过程、钻进效果、遇到的主要问题及解决办法等进行了介绍。  相似文献   

桂北地区罗地1井钻探施工实践   总被引：1，自引：1，他引：0  

秦毅 《探矿工程》2018,45(1):56-59,88

页岩具有较强的水敏性,在页岩气勘查钻进施工中,井内易发生坍塌、剥落造成超径或缩径等井壁失稳现象。罗地1井采用金刚石绳索取心工艺进行钻进,完井井深1501.06 m,岩心采取率、井斜等各项指标均符合地质设计要求。本文主要从罗地1井的钻井设备、井身结构、施工难点等方面进行总结,可为今后页岩气调查井的施工提供参考。  相似文献   

页岩气基础地质调查皖南地1井钻探施工技术          下载免费PDF全文

刘文武  赵志涛  翁炜  朱迪斯  单文军  贺云超 《探矿工程》2018,45(10):66-70

皖南地1井是部署在安徽省南陵县烟墩镇的一口页岩气基础地质调查井。文章详细介绍了该井的钻探施工工艺技术以及遇到复杂问题的处理方法,并对钻效进行了分析,提出了实现优质高效钻探的措施。项目的顺利实施,梳理了皖南地区地层层序,为页岩气储层理论推测提供了有力的实物数据支撑和验证。  相似文献